null

SHOP BY CATEGORY OR USE QUICK LINKS FOR MORE INFORMATION

PHONE SUPPORT (804) 318-3686

QAQC LAB LOGO SOLUTIONS FOR QUALITY CONTROL
  • MASTER TRIPLE STYLE SAMPLER 1500 mm LENGTH (8) SAMPLING POINTS Standard triplicate-sample design. Three unit-dose samples are obtained from exactly the same spot at each sample port. The bottom most port starts at 5.5” from the tip. Each sample port requires either three sample dies or three blank dies. Hollow blank dies and Delrin inner shaft are recommended with this design. Stock sizes are 3ft with 5 ports, 4ft with 7 ports, 5ft with 8 ports and 6ft with 10 ports. Consideration should be given to the location of the bottom most port in this model before placing an order.
  • Sample Inserts are available in 0.1ml increments from 0ml to 4ml.
  • TRIPLE Style Sampler Collects THREE sets of samples at each sampling point. Sample Inserts are available in 0.1ml increments from 0ml to 4ml.
  • PVC Storage tube to protect the sampler from damage. (Required) Small Brush kit - (2) Nylon brushes, 0.5" & 1.0", with long PVC handles to clean the shafts for Standard Model Samplers.
  • PVC stand to hold the outer tube and the inner tube separately while retrieving the dies with die retrieval tool.

    • UD Master Triple Style Sampler 1500 mm LENGTH (8) SAMPLING POINTS

    QAQC LAB

    $7,948.00
    (No reviews yet) Write a Review
    SKU:
    675 1230C1500
    Weight:
    10.00 LBS
    Width:
    6.00 (in)
    Height:
    60.00 (in)
    Depth:
    6.00 (in)
    Shipping:
    Calculated at Checkout
    Adding to cart… category.add_cart_announcement

    Product Description

    SALES (804) 318-3686

    UNIT DOSE MASTER SAMPLER Triple Style 1500 mm x 25 mm

    TOTAL (8) SAMPLING POINTS (EACH REQUIRES A SAMPLE CELL)

    24 CELLS NEEDED TOTAL

    External Polish: <1 Micron Ra
    Internal Polish: None

    Slot Length: 44 mm

    sampler-ud-master.jpg

    Standard triplicate-sample design. Three unit-dose samples are obtained from exactly the same spot
    at each sample port. The bottom most port starts at 5.5” from the tip. Each sample port requires
    either three sample dies or three blank dies. Hollow blank dies and Delrin inner shaft are
    recommended with this design. Stock sizes are 3ft with 5 ports, 4ft with 7 ports, 5ft with 8 ports and
    6ft with 10 ports. Consideration should be given to the location of the bottom most port in this model
    before placing an order.

    Product Videos

    Custom Field

    Product Reviews

    Write a Review